CW Electrical Services has been the electrician Toms River homeowners, landlords, and businesses call when something goes wrong -- or when they want the job done right the first time. Since 2004, we have handled everything from a dead outlet in a bedroom to a full-panel upgrade for a commercial property on the main strip. Same-day electrical service available means you are not waiting a week to get someone on-site. When you call, a real local electrician picks up, and we get to work.
Whether you need a flickering light traced to its source, a breaker panel replaced before it becomes a hazard, or a licensed electrician near you to handle a full rewire, we are ready. Homeowners, property managers, and business owners across Ocean County trust us because we show up prepared, explain what we find, and finish the job cleanly.
Fair price every visit. On time every visit. Code-compliant every visit.
Call (848) 395-9659 for a quote.
Good electrical work isn't complicated, it's just done right, and that starts with finding the actual problem. Flickering lights, a breaker that keeps tripping, outlets that stopped working, a burning smell near a wall plate -- these are the calls we get every day, and every one of them deserves a proper diagnosis, not a guess.
When we arrive, we trace the symptom back to the source. A circuit overload might look like a nuisance breaker trip, but it can also signal undersized wiring or a panel that has run out of capacity. A warm outlet or sparks from a receptacle points to a wiring connection that has failed and needs immediate attention. Partial power loss in one part of the house often means a tripped double-pole breaker or a problem at the service entrance.
We carry the tools to test, measure, and confirm before we recommend a repair. Work performed by licensed electricians means the fix meets code, not just the minimum that gets the lights back on today.
We'll get your lights back on fast.
Keeping a home safe starts with the wiring behind the walls, and a lot of that work shows up at the outlet or switch. We install and repair standard outlets, GFCI outlets, USB outlets, dimmer switches, smart switches, and smart outlets for homeowners and landlords throughout the area.
GFCI protection is required by code in kitchens, bathrooms, garages, and anywhere near water. If your GFCI outlet is not working, will not reset, or was never installed where it should be, we fix it or replace it on the spot. AFCI protection for bedrooms and living areas is another code requirement in newer construction and renovations -- we handle that too.
Outdoors, we install weatherproof outlets for decks, patios, garages, and exterior walls. Adding an outlet to a room that never had one, swapping a standard switch for a dimmer, or running a new circuit to a home office -- these are straightforward jobs that make a real difference in how a space works.
One call brings an electrician to your door.
Not every electrician works the same way, and panel work is where that difference shows. A breaker panel that trips constantly, a fuse box that has not been touched since the 1970s, or a 100-amp service that cannot keep up with a modern home -- these are not problems to patch over. They need a proper solution.
We replace outdated panels, upgrade service to 200 amps, install subpanels for additions and detached garages, and run load calculations before any major work begins. Older Ocean County homes were built for a fraction of today's electrical demand. Adding a washer and dryer, a home office, a second refrigerator, or an EV charger to a panel that was already near capacity creates real risk.
Locally owned and operated electricians means we know the housing stock here. We have upgraded panels in homes built in every decade going back to the mid-twentieth century, and we know what to look for when the original wiring is still in the walls.
Call today and we'll get the power back where it belongs.
When the electrician arrives, the real work begins, and for lighting jobs that means planning the layout before the first hole is cut. We install recessed LED lighting, pendant lights, chandeliers, under-cabinet lighting, and bathroom exhaust fans for homeowners who want a finished result that looks intentional, not improvised.
Ceiling fan installation is one of our most common calls. Whether you have existing wiring or need a new circuit run, we handle the whole job -- box, wiring, and fan -- so it is properly supported and balanced when we leave. Fan replacement on an older fixture is usually a half-day job.
Outside, we install security lighting, motion sensor lights, flood lights, and landscape lighting. Good outdoor lighting adds curb appeal, deters unwanted visitors, and makes a property safer after dark. For Toms River homeowners close to the water, weatherproof fixtures and proper grounding matter more than they do inland.
Ocean County's housing stock is older than most of the country, and the coastal climate adds its own demands. Nor'easters knock out power for days at a time, older homes still carry wiring that predates modern safety standards, and EV adoption in New Jersey is among the highest in the nation. The three services below come up constantly in this area, and we have the experience to handle each one correctly.
Toms River and the surrounding shore communities have a large share of homes built before the 1970s, and many of them still carry knob-and-tube or aluminum branch wiring. Knob-and-tube uses no ground wire and was never designed for today's electrical loads. Aluminum wiring expands and contracts with heat, which loosens connections over time and creates a fire risk at outlets and fixtures.
Insurance companies increasingly refuse to cover homes with these systems, and for good reason. A full or partial rewire brings the home up to current code, adds arc-fault and ground-fault protection at the panel, and gives the homeowner documentation that the wiring is safe. We assess the scope, explain the options, and do the work with minimal disruption to finished walls wherever possible.
Level 2 EV charger installation starts with the panel. A 240-volt, 50-amp dedicated circuit is the standard for home charging, and if the existing panel does not have the capacity, we address that first. We run the circuit, install the outlet or hardwired connection, and confirm everything is code-compliant before the charger goes live.
Tesla charger installation, universal Level 2 chargers, and home charging station installs all follow the same process on the electrical side. We work with the homeowner to find the best location -- typically in the garage or on an exterior wall -- and route the circuit cleanly.
A nor'easter can take out power for three days or more in parts of Ocean County. A properly wired standby or portable generator makes that manageable. The electrical work involves the transfer switch, the dedicated circuit, and the connection to the panel -- we handle all of it.
A transfer switch is not optional. It isolates the generator from the utility line, which protects both the home and the utility workers restoring power outside. We install manual and automatic transfer switches, wire the generator inlet, and test the system before we leave. We protect your floors and finishes while we work, and we clean up completely when the job is done.
Coastal storms bring more than wind and rain -- they bring power fluctuations that can damage electronics, appliances, and sensitive equipment in an instant. A whole-home surge suppressor installed at the panel catches those spikes before they reach your devices. It is a straightforward addition that protects everything plugged in under one roof.
Electrical safety inspections are a practical step for anyone buying an older home, selling a property, or simply unsure about a system that has not been looked at in years. We check the panel, the wiring, the outlets, and the grounding, then give the homeowner a clear picture of what is safe, what needs attention, and what can wait. We also install hard-wired smoke detectors and carbon monoxide detectors as part of a safety upgrade or as a standalone service.
Book today. Wired tomorrow. Done by the weekend.
We work with property managers, business owners, and contractors on commercial projects throughout the area. Office buildouts, retail lighting upgrades, warehouse circuits, commercial panel replacements, and dedicated circuits for equipment -- we handle the full range of commercial electrical work that keeps a business running.
Commercial jobs move on a schedule, and we respect that. We communicate clearly about what the work involves, how long it will take, and what access we need. The same standards that apply on a residential job apply here: clean work, code-compliant installation, and a finished result that does not need to be redone.
Electrical pricing depends on the job. A simple outlet swap is not the same as a panel replacement, and we do not pretend otherwise. What we do promise is a clear quote before any work begins, so there are no surprises when the job is done.
Factors that affect cost include the scope of the repair or installation, the condition of the existing wiring, and whether any code corrections are needed along the way. We walk through what we find, explain what the work involves, and give you a number you can make a decision on.
Call (848) 395-9659 for a quote and we will tell you exactly what to expect.
We serve Toms River and the surrounding communities throughout Ocean County, including Brick, Lakewood, Seaside Heights, Point Pleasant, Beachwood, and Barnegat. If you are nearby and need an electrician, we can likely get someone to you the same day.
We're proud to be the local electricians this community calls first. When you call, you reach someone who knows the area, knows the housing stock, and can give you a straight answer about what the job involves.
Call (848) 395-9659 and we will find the earliest available time that works for you. Same-day electrical service is available, so if you call in the morning there is a good chance we can have someone at your door the same day. We cover Toms River and the surrounding Ocean County communities, so travel time is rarely an issue.
We work with homeowners, landlords, property managers, and business owners across Ocean County. Office buildouts, retail lighting upgrades, commercial panel replacements, and dedicated circuits for equipment are all part of what we do. If you manage a property or run a business in the Toms River area, call (848) 395-9659 and we can talk through what your project involves.
We provide a clear quote before any work begins, and we stick to it for the scope of work we agreed on. If something unexpected turns up once we are into the job, we talk to you about it before moving forward. There are no billing surprises when we leave.
When you call, we go over the problem with you and get the job on the schedule. The electrician arrives, runs a proper diagnosis to find the actual cause, and then walks you through what the repair or installation involves and what it will cost. Once you approve the work, we complete it cleanly and test everything before we leave.
Someone needs to be on-site to let us in and to approve the work before we begin. If you have a property manager or a trusted person who can be there in your place, that works too. We will not start any work without someone authorized to approve it.
Every job we complete meets current electrical code requirements. Work is performed by licensed electricians, and we do not cut corners on grounding, bonding, arc-fault protection, or any other code requirement. If a code correction is needed as part of the job, we handle it as part of the work rather than leaving it for later.
A single visit can cover a wide range of work depending on what we find. Common calls include tracing flickering lights or dead outlets to their source, replacing a faulty breaker, installing GFCI or AFCI protection, adding a dedicated circuit, or swapping out a fixture or ceiling fan. If the problem turns out to be larger than expected, we explain that clearly before recommending additional work.
We serve Toms River and the surrounding Ocean County communities, including Brick, Lakewood, Beachwood, Point Pleasant, Seaside Heights, Barnegat, and Manchester Township. For most locations in the area, there is no separate travel charge. Call (848) 395-9659 and we can confirm coverage for your specific address.
Yes, and the more detail you can give us when you call, the better. If you know which outlets are not working, which breaker keeps tripping, or where you noticed a burning smell, share that information upfront. It helps the electrician arrive prepared and get to the diagnosis faster.
CW Electrical Services has served Toms River and Ocean County since 2004. Same-day electrical service available means we are not a week out when something goes wrong. Work performed by licensed electricians means the job is done to code and built to last.
Whether it is a repair that cannot wait, an upgrade you have been putting off, or a new installation for a home or business, we are ready to help.
Call (848) 395-9659 for a quote.
Fair price every visit. On time every visit. Code-compliant every visit.
Every electrical job is different, and the right solution depends on what is actually happening in your home or building. The table below covers the full range of work we handle in Toms River and across Ocean County, so you can quickly find what you need and know what to expect before you call. Same-day electrical service is available, and work is performed by licensed electricians on every job.
| Electrical Service | What's Included | Best For | What to Keep in Mind |
|---|---|---|---|
| Ceiling Fan Installation |
| homeowners adding a fan to a room with or without existing wiring | Fan replacement on an older fixture is usually a half-day job. New installations may require a dedicated circuit run. |
| Outlet & Switch Installation |
| homeowners adding outlets, upgrading switches, or bringing kitchens and baths up to code | GFCI protection is required by code in kitchens, bathrooms, garages, and anywhere near water. |
| Electrical Panel & Service Upgrades |
| older homes adding appliances, EV chargers, or home offices | Many Ocean County homes were built for a fraction of today's electrical demand. A panel upgrade is the foundation for everything else. |
| Electrical Repairs & Troubleshooting |
| any homeowner or business with an unexplained electrical problem | A proper diagnosis finds the root cause, not just the symptom. Warm outlets or sparks need same-day attention. |
| Backup Generator Installation |
| Ocean County homeowners who lose power during nor'easters | A transfer switch is required. It isolates the generator from the utility line and protects both the home and utility workers outside. |
| Whole-Home Surge Protection |
| homeowners with electronics, appliances, or equipment sensitive to power fluctuations | A single suppressor at the panel protects everything in the home at once. Coastal storms make this a practical investment in this area. |
| Dedicated Appliance Circuits |
| homeowners adding a major appliance or finishing a basement or garage | Sump-pump circuits are especially common in Ocean County homes with basements. A dedicated circuit ensures the pump has reliable power when it matters most. |
| Electrical Safety Inspections |
| buyers, sellers, and owners of older homes that have not been inspected recently | We give you a clear picture of what is safe, what needs attention, and what can wait, so you can make an informed decision. |
| Knob-and-Tube & Aluminum Rewiring |
| owners of pre-1970s homes in Toms River and surrounding shore communities | Insurance companies increasingly refuse coverage for homes with these systems. A rewire addresses the risk and produces documentation that the wiring is safe. |
| Wiring & Circuit Installation |
| any home or business needing new wiring or circuits added to existing construction | We route circuits cleanly and minimize disruption to finished walls wherever the layout allows. |
| Lighting Installation |
| homeowners updating interior lighting or adding outdoor security lighting | For coastal properties, weatherproof fixtures and proper grounding are especially important on exterior installations. |
| Breaker & Fuse Repair |
| homes where a breaker trips repeatedly or a fuse keeps blowing | A breaker that trips constantly may signal an overloaded circuit or a wiring issue, not just a worn breaker. |
| EV Charger Installation |
| homeowners with an electric vehicle who want faster home charging | New Jersey EV adoption is among the highest in the country. We start with the panel to confirm it can carry the added load before running the circuit. |
How do I know if my electrical panel needs to be upgraded?
A few signs point clearly to a panel that has run out of capacity or is past its useful life: breakers that trip frequently, a fuse box that has not been replaced since the 1970s, lights that dim when a large appliance kicks on, or a panel that feels warm to the touch. If you are adding an EV charger, a home office, or any major appliance to an older home, we run a load calculation before any work begins to confirm whether the existing panel can handle it.
What causes a breaker to keep tripping?
A breaker trips when a circuit draws more current than it is rated to carry. That can mean the circuit is genuinely overloaded, which is fixable by adding a dedicated circuit for the appliance or device causing the problem. It can also mean the breaker itself has worn out and trips too easily, or that there is a wiring fault somewhere on the circuit. We trace the cause before recommending a fix, because replacing a breaker that trips due to a wiring fault does not solve the underlying problem.
Is the electrical work permitted and inspected?
Work that requires a permit under local code gets one. We handle the permit process and schedule the inspection as part of the job. Code-compliant installation is not optional for us; it is how we work on every project, whether it is a simple outlet swap or a full panel replacement.
Same-Day and Emergency Availability
When something goes wrong with your electrical system, waiting a week is not an option. Same-day electrical service is available throughout Toms River and the surrounding Ocean County communities, so we can often have someone at your door the same day you call.
How do I know if the wiring in my older home is safe?
Homes built before the 1970s in Toms River and the surrounding shore communities often carry knob-and-tube or aluminum branch wiring. Neither system is inherently dangerous if it has been maintained and not overloaded, but both have limitations that modern wiring does not. Knob-and-tube has no ground wire and was not designed for today's electrical loads. Aluminum wiring develops loose connections over time as it expands and contracts with heat. An electrical safety inspection gives you a clear picture of what is in the walls and what, if anything, needs to be addressed.
What does EV charger installation involve on the electrical side?
A Level 2 home charger runs on a 240-volt, 50-amp dedicated circuit. We start by checking whether the existing panel has the capacity to support that load. If it does not, we address the panel first. Once capacity is confirmed, we run the circuit to the garage or exterior wall, install the outlet or hardwired connection, and confirm everything meets code before the charger goes live. The process is the same whether you drive a Tesla or any other electric vehicle.
Do I need to be home when the electrician is working?
Someone needs to be on-site to let us in and to approve the work before we begin. That can be you, a property manager, or another person you authorize to make decisions on your behalf. We will not start any work without someone present who can approve the scope and the quote.
Experienced With Older and Newer Homes
Ocean County's housing stock spans nearly a century of construction, and we have worked on homes from every era. Whether the wiring is brand new or predates modern safety standards, we know what to look for and how to bring it up to code correctly.
How does pricing work, and will the quote change once the job starts?
We provide a clear quote before any work begins. If something unexpected turns up once we are into the job, such as wiring that is in worse condition than it appeared, we stop and talk to you before moving forward. You will not see a number on the invoice that we did not discuss with you first.
What is involved in a backup generator hookup?
The electrical work for a generator installation covers the transfer switch, the dedicated circuit, and the connection to the panel. A transfer switch is not optional; it isolates the generator from the utility line so that power does not feed back into the grid while utility workers are restoring service outside. We install manual and automatic transfer switches, wire the generator inlet, and test the full system before we leave. The generator itself is the homeowner's choice; we handle the electrical side.
Clean and Respectful Workmanship
We protect your floors and finishes while we work, and we clean up completely when the job is done. The goal is a finished result that looks intentional and a home that is left the way we found it, minus the electrical problem.
Why did my outlet or switch stop working?
A dead outlet is often caused by a tripped GFCI somewhere upstream on the same circuit, a loose wire connection at the outlet or in the junction box, or a failed breaker. A switch that stops working usually has a wiring connection that has come loose or a switch mechanism that has worn out. In some cases, a dead outlet in one room is connected to a GFCI outlet in another room, such as the bathroom or garage, that has tripped. We trace the circuit to find the actual cause rather than guessing.
What does it mean when lights flicker or dim?
Occasional dimming when a large appliance starts up is common and usually means the circuit is near capacity. Persistent flickering, especially in one part of the house, can point to a loose connection at the fixture, the switch, or somewhere in the wiring. Flickering across the whole home sometimes indicates a problem at the service entrance or the utility connection. Any flickering that comes with a buzzing sound, a burning smell, or a warm wall plate warrants a same-day call.
Is whole-home surge protection worth it for a coastal home?
Coastal storms bring power fluctuations that can damage electronics, appliances, and sensitive equipment in an instant. A panel-mounted surge suppressor catches those spikes before they reach your devices, and it protects everything in the home under a single installation. For homes in Ocean County that see nor'easters and summer storms regularly, it is a practical addition that costs far less than replacing the equipment it protects.
Call (848) 395-9659 and we will walk you through exactly what your job involves, what it will cost, and when we can get started.
(848) 395-9659