Toms River Electrical Company handles the full range of residential and commercial electrical work for homeowners, landlords, property managers, and businesses across Toms River and Ocean County. Whether you need a quick outlet repair or a complete panel upgrade, we scope the job on the call and get it scheduled. We are open 24 hours a day, 7 days a week, including nights, weekends, and holidays. Fast turnaround. Pricing agreed up front. Safe results.
Call (848) 395-9659 for a quote.
Every home's wiring tells a different story, and some of what it says is worth paying close attention to. Flickering lights that come and go are not always a bulb problem. They can point to a loose connection, an overloaded circuit, or aging wiring that is no longer handling the load reliably.
Dead outlets, outlets that feel warm to the touch, and outlets that produce a burning smell are all reasons to stop using that receptacle and call. A buzzing sound from a switch or panel is another signal. These are not minor annoyances. They are signs that something in the wiring needs to be looked at.
A breaker that trips repeatedly or will not reset is the panel telling you the circuit is carrying more than it should, or that the breaker itself has failed. Partial loss of power to one area of the house can mean a tripped breaker, a breaker that has failed internally, or a utility-side service issue. Sparks from an outlet or switch should be treated as urgent.
We give you straight answers about your panel and wiring before any work is scheduled.
Getting your electrical problem handled starts with a quick call. Sparks, a burning smell, a hot panel, or a total loss of power are all situations that should not wait until morning. We are available at any hour, any day, and that covers weekends and holidays the same as any other time.
This area's panels, permits, and utility rules are familiar ground. When you call, we confirm the scope on the phone and give you the price before anything is scheduled. You know what the visit covers before anyone shows up.
Call (848) 395-9659 any time.
Wiring is easier to deal with when somebody explains it plainly, and that is how we approach every repair call. Outlet troubleshooting is one of the most common jobs we handle. A dead outlet might be a tripped GFCI somewhere upstream, a wiring fault, or a failed receptacle. We trace it to the source rather than guessing.
Breaker diagnostics follow the same logic. A breaker that will not hold a reset is not a problem to ignore. It may be overloaded, it may have failed, or the circuit may have a fault that needs to be cleared before the breaker will stay set.
Flickering lights and intermittent power issues get traced back through the circuit, not patched at the fixture. Switch problems, including switches that run hot, switches that spark, and dimmers that fail, are all straightforward repairs when the wiring behind them is handled correctly.
We work with no pressure and no gimmicks, just safe, solid wiring on every job.
For residential and commercial electrical work alike, the panel is where most capacity decisions get made. An older Ocean County home running on a 100-amp service or a fuse box will run into limits quickly, especially when adding appliances, finishing a basement, or installing an EV charger. Many properties in this area still have fuse boxes or undersized panels that were installed decades ago.
A 100-amp to 200-amp service upgrade involves coordinating with the utility, pulling the appropriate permits, and replacing the panel and service entrance equipment. We handle the load calculation as part of scoping the job so you know what the upgrade actually enables.
Fuse box to breaker panel conversions are common in older homes throughout Ocean County. Adding circuits, installing a subpanel for a garage or outbuilding, and planning panel capacity for an addition are all part of this work. A breaker that keeps tripping is a warning worth heeding.
We handle panel work for homeowners, landlords, and property managers who need the job done thoroughly and without shortcuts.
GFCI protection is required by code in kitchens, bathrooms, garages, and outdoor locations. AFCI protection applies to bedrooms and other living spaces in most current code editions. We install both as part of new work and as upgrades in older homes where the protection is missing.
USB outlets and smart switches are straightforward upgrades when the wiring behind them is handled properly. We confirm the circuit can support what is being added before the work starts.
Dedicated appliance circuits are some of the most requested jobs we handle. A dryer, electric range, wall oven, or refrigerator each needs its own circuit sized to the load. We run the circuit from the panel, size the breaker correctly, and install the outlet or connection point to match the appliance requirements.
Adding outlets to rooms that are short on receptacles is simple work when access is available and the panel has room. When it does not, we address the panel first.
Scheduling a service call is simple, and lighting work is one of the most common reasons people call. Ceiling fan installation involves more than swapping a fixture. If the existing box is not fan-rated, it needs to be replaced. If there is no switched circuit in the right location, we run one.
Recessed and LED lighting installs range from single-room retrofits to full layouts with new circuits. We plan the circuit load before the fixtures go in so the breaker is sized to handle what is actually there.
Under-cabinet lighting wiring is a clean finish job that works best when the wiring is run properly rather than surface-mounted. Outdoor and security lighting, including motion sensors, flood lights, porch lights, and landscape wiring, rounds out the exterior work. We show up ready to work.
Kitchen and bathroom remodels almost always involve electrical work. Dedicated circuits for appliances, GFCI placement, and fixture rough-in need to be coordinated with the rest of the project. We work alongside contractors or directly with homeowners depending on how the job is structured.
Basement finishing and home addition wiring starts with a panel capacity check. If the existing service cannot carry the added load, that gets addressed before the new circuits are roughed in. Garage and shed wiring, including subfeeds, outlets, and lighting, follows the same process.
New construction electrical from rough-in to finish is work we handle for both residential and commercial builds. Office, retail, apartment, and rental property work all fall within the scope of what we do. Leave the breakers to us.
Ocean County's housing stock includes some of the oldest homes in the country, and the shore area brings its own set of electrical demands. The three services below come up regularly in this region for specific reasons.
Knob-and-tube wiring and aluminum branch wiring are both common in older Ocean County homes. Knob-and-tube lacks a ground conductor and was not designed for the loads modern households place on a circuit. Aluminum branch wiring, installed widely in the 1960s and 1970s, expands and contracts with heat in ways that can loosen connections over time. Replacement is typically staged by area or circuit, coordinated with any panel work needed to support the new wiring. AFCI and GFCI protection are built into the scope as required by current code.
New Jersey has one of the highest rates of EV adoption in the country, and Level 2 home charging is the practical standard for daily use. A Level 2 charger requires a dedicated 240-volt circuit with a breaker sized to the charger's output. We check panel capacity before the installation is scheduled, confirm whether the charger will be outlet-mounted or hardwired, and account for garage or driveway placement specific to the property. The scope and price are confirmed on the call.
Nor'easters and coastal storms knock out power across Ocean County with enough regularity that generator backup is a practical consideration for shore-area homes and properties. A generator hookup involves installing a transfer switch, manual or automatic depending on the setup, connecting it to the panel, and running a dedicated circuit for the generator feed. We size the electrical side based on a load calculation so the transfer switch and panel connection are matched to what the generator will actually carry.
A panel-mounted surge protection unit covers the entire home in a way that point-of-use strips cannot. It handles voltage spikes at the service entrance before they reach the wiring and connected equipment. We install whole-home surge protection as a standalone job or as part of a panel upgrade.
Electrical safety inspections cover the panel, wiring, outlets, and visible connections throughout the property. They are useful for buyers before closing, landlords managing code compliance on rental properties, and owners of older homes where the wiring has not been looked at in years. Ready for your wiring. Call now.
Getting your electrical problem handled starts with a quick call. Pricing varies by job scope. Panel work, rewiring, and EV charger installs each involve different materials, circuit counts, and access conditions, so the rate is confirmed after the job is scoped on the call. You know the price before anything is scheduled.
Factors that affect cost include panel size, the number of circuits involved, the condition of the existing wiring, and how accessible the work area is. A straightforward outlet replacement is a different conversation from a full panel upgrade.
Call (848) 395-9659 for a quote.
We confirm what the job involves, give you the rate, and schedule from there. Call and we'll handle the lights, outlets, and panel.
Toms River is our primary service area, and we cover Ocean County broadly. Nearby towns we serve regularly include Brick, Lakewood, Barnegat, Seaside Heights, Beachwood, Point Pleasant, Jackson, and Stafford Township.
We work with homeowners, landlords, property managers, and small business owners. Residential and commercial calls are handled the same way: scope on the call, price before the work starts, scheduling that fits the situation. We are available at any hour, any day.
Fast turnaround. Pricing agreed up front. Safe results.
An inspection makes sense before buying an older home in Ocean County, when a landlord is preparing a rental unit for a new tenant, or when a homeowner has not had the wiring checked in years and something feels off. It covers the panel condition, wiring type and age, GFCI and AFCI placement, and grounding. The inspector notes what each finding means before anything is recommended.
A panel that trips breakers frequently, runs warm to the touch, makes buzzing or crackling sounds, or cannot accommodate a new circuit without overloading is telling you it has reached its limit. Fuse boxes and 100-amp services in older Ocean County homes are the most common candidates for an upgrade.
Call (848) 395-9659 and describe what you are seeing and we will scope it from there.
Flickering or dimming lights can point to a loose connection, an overloaded circuit, or aging wiring that is no longer handling the load reliably. In some cases it is a simple fix at the fixture or switch. In others it points to something deeper in the wiring that needs to be traced. Either way, it is worth a call rather than something to wait on.
A dead outlet may be a tripped GFCI upstream, a failed receptacle, or a wiring fault deeper in the circuit. An outlet that feels warm or shows discoloration around the face plate is a sign of heat buildup at the connection, which is a safety concern. Stop using the outlet and call so we can trace the cause.
GFCI protection is required in kitchens, bathrooms, garages, and outdoor locations. AFCI protection applies to bedrooms and most living-space circuits under current code editions. Older homes in Ocean County often lack both, and we install them as part of new work or as targeted upgrades when the protection is missing.
If you smell burning, see sparks, or notice a hot panel, turn off the affected circuit at the breaker if you can do so safely, and avoid using the outlet or switch. Do not try to open the panel yourself. If the situation involves visible arcing or smoke, leave the area and call from outside.
We are available at any hour at (848) 395-9659.
Ceiling fan installation starts with confirming the existing electrical box is fan-rated. A standard light fixture box is not rated for the weight and movement of a fan and needs to be replaced before the fan goes up. We also confirm the circuit is appropriate for the fan load and that the switch is wired correctly for the configuration.
When wiring runs through finished walls, older framing, or areas that are difficult to access, the time and material involved in running new circuits or tracing faults increases. Knob-and-tube or aluminum wiring that needs to be replaced rather than extended also affects scope. We identify these factors on the call and factor them into the price before the visit is scheduled.
A full rewire makes sense when the existing wiring is knob-and-tube throughout, when aluminum branch wiring is widespread, or when the panel cannot support a modern load regardless of what is added to it. Partial rewiring targets specific circuits, typically the ones in kitchens, bathrooms, laundry rooms, or areas where the wiring is showing the most wear. We scope which approach fits the property on the call.
Code-correction work is scoped as part of the project it is tied to. When a renovation, panel upgrade, or rewire brings us into contact with wiring that does not meet current standards, we address it as part of the job. We explain what needs to be corrected, what it involves, and what it adds to the scope before any work begins.
A Level 2 home EV charger requires a dedicated 240-volt circuit with a breaker sized to the charger's output. Before the installation is scheduled, we check panel capacity to confirm the load can be added. If the panel needs a breaker added or the service upgraded first, that gets worked into the plan. The scope and price are confirmed on the call before anything is scheduled.
A generator that is plugged into a standard outlet or connected directly to the panel without a transfer switch can back-feed power onto the utility grid, which is a serious hazard for anyone working on the lines. The electrical side of a generator hookup involves installing a transfer switch, connecting it to the panel, and sizing the circuit for the generator's output. We handle the transfer switch installation and panel connection as the core of the job.
A point-of-entry surge protection device installs at the main panel and handles voltage spikes before they reach any branch circuit in the house. A power strip with surge protection only covers the devices plugged into it. Panel-mounted surge protection is a practical addition in coastal Ocean County, where summer thunderstorms and utility switching events are common.
Toms River Electrical Company is available 24 hours a day, 7 days a week. The price is confirmed on the call, the work is scoped before anything is scheduled, and you get straight answers about what the job involves.
Call (848) 395-9659 for a quote.
We handle electrical work for homes and businesses across Toms River and Ocean County, from a single outlet repair to a full panel upgrade or rewire. Every job is scoped on the call so you know what is involved and what it costs before anything is scheduled. The table below covers the services we offer most often, who each one fits, and what is practical to know going in.
Call (848) 395-9659 for a quote on any of them.
| Electrical Service | What the Job Involves | When You Need It | Things to Know |
|---|---|---|---|
| Wiring & Circuit Installation | New circuit runs from panel, Remodel and addition rough-in, Subpanel installation for garage or outbuilding, Basement and new construction wiring | Contractors and homeowners adding space, finishing a basement, or wiring a detached structure | Panel capacity is checked before new circuits are roughed in. If the existing service cannot carry the added load, that gets addressed first. |
| Lighting Installation | Recessed and LED retrofit lighting, Outdoor and security lighting, Under-cabinet wiring, Motion sensor and flood light installation | Homeowners remodeling or adding exterior security lighting | Circuit load is calculated before fixtures go in so the breaker is sized for what is actually installed, not just the first fixture. |
| Electrical Panel & Service Upgrades | 100-amp to 200-amp service upgrade, Fuse box to breaker panel conversion, Load calculation and utility coordination, Permit and inspection handling | Older Ocean County homes adding appliances, finishing space, or installing an EV charger | A service upgrade involves coordinating with the utility and pulling permits. We handle both as part of the job scope. |
| Breaker & Fuse Repair | Breaker that trips repeatedly, Breaker that will not reset, Failed fuse replacement, Circuit fault diagnosis | Any property where a circuit has stopped holding or a fuse keeps blowing | A breaker that will not stay set often points to a wiring fault on the circuit, not just a failed breaker. We check both before closing the panel. |
| EV Charger Installation | Dedicated 240-volt circuit installation, Panel capacity check before scheduling, Outlet-mount or hardwired charger connection, Garage and driveway placement wiring | Toms River homeowners adding a Level 2 home charger for daily EV use | New Jersey has one of the highest EV adoption rates in the country. Panel capacity and charger placement are confirmed on the call before anything is scheduled. |
| Dedicated Appliance Circuits | Dryer and electric range circuits, Wall oven and refrigerator wiring, Laundry room circuit installation, Breaker sizing to appliance load | Homeowners adding or replacing a major appliance that needs its own circuit | Each major appliance needs a circuit sized specifically to its load. We run the circuit from the panel, size the breaker correctly, and install the outlet or connection point to match. |
| Ceiling Fan Installation | Fan-rated box replacement, Switch and circuit wiring, Fan and light kit connection, Location-specific circuit runs | Homeowners replacing a light fixture with a ceiling fan or adding a fan where none existed | A standard light fixture box is not rated for the weight and movement of a fan. If the existing box is not fan-rated, it gets replaced before the fan goes up. |
| Outlet & Switch Installation | GFCI and AFCI outlet upgrades, USB and smart outlet installation, Switch replacement and dimmer wiring, Adding receptacles to under-served rooms | Homeowners updating older wiring or adding convenience outlets in kitchens, baths, and living areas | GFCI protection is required by code in kitchens, bathrooms, garages, and outdoor locations. We confirm what is missing and bring it up to current requirements. |
| Code-Correction Wiring | Wiring brought to current code during renovation, Missing ground conductors addressed, Protection gaps identified and corrected, Scope explained before work begins | Properties undergoing renovation or panel work where older wiring is exposed | Code-correction work is scoped as part of the project it is tied to. We explain what needs to be corrected and what it adds to the scope before any work starts. |
| Whole-Home Surge Protection | Panel-mounted surge protection unit, Voltage spike protection at service entrance, Installation as standalone or with panel upgrade | Homeowners with sensitive electronics or properties in areas prone to summer thunderstorms | A panel-mounted unit handles spikes before they reach any branch circuit in the house. It covers the whole home in a way that individual power strips cannot. |
| Electrical Safety Inspections | Panel condition and wiring review, GFCI and AFCI placement check, Grounding and bonding assessment, Written findings before any work is recommended | Home buyers, landlords managing rental compliance, and owners of older homes | An inspection covers what is there, what it means, and what needs attention. Nothing is recommended without explaining why first. |
| Electrical Repairs & Troubleshooting | Dead outlets traced to source, Flickering light diagnosis, Buzzing switch or panel investigation, Burning smell or warm outlet inspection | Homeowners and landlords dealing with an active electrical problem | Tracing the fault before replacing parts saves time and avoids repeat calls. We identify the cause first. |
| Knob-and-Tube & Aluminum Rewiring | Knob-and-tube circuit replacement, Aluminum branch wiring remediation, Staged rewiring by area or circuit, AFCI and GFCI integration during rewire | Owners of older Ocean County homes with original or mid-century wiring | Aluminum branch wiring expands and contracts with heat in ways that loosen connections over time. Remediation is typically staged by circuit and coordinated with any panel work the property needs. |
| Backup Generator Installation | Transfer switch installation, Manual or automatic switch options, Panel connection and dedicated circuit, Load calculation for generator sizing | Shore-area homeowners and properties that lose power during nor'easters and coastal storms | A generator connected without a transfer switch can back-feed power onto the utility grid, which is a serious hazard. The transfer switch and panel connection are the core of the electrical side of this job. |
| Basement & Sump-Pump Circuits | Dedicated sump pump circuit installation, Basement outlet and lighting wiring, Subpanel for finished basement, GFCI protection in below-grade locations | Homeowners finishing a basement or adding reliable power for a sump pump | A sump pump on a shared circuit risks losing power when another load trips the breaker. A dedicated circuit removes that risk. |
What causes a breaker to trip repeatedly, and when is it more than an overload?
A breaker trips when a circuit carries more current than it is rated for, but repeated tripping is not always an overload. A wiring fault on the circuit, a failing breaker, or a single appliance drawing more than its rated load can all cause the same symptom. We check the circuit and the breaker before replacing anything so the actual cause gets addressed rather than the symptom.
Is the electrical work permitted and inspected?
Panel upgrades, service changes, new circuit installations, and rewiring work require permits in most jurisdictions, and we handle the permit and inspection process as part of the job scope. We confirm what applies to the specific work at your address before anything is scheduled. Work that is done without a required permit can create problems at resale and may not be covered by a homeowner's policy.
How do I know if my home is ready to handle added electrical load?
The panel is the starting point. A 100-amp service or a fuse box running a modern household is typically at or near its limit before any new load is added. If you are planning an EV charger, a major appliance, or a finished basement, we check panel capacity as the first step and work out whether an upgrade needs to happen before the new circuits are installed.
Faults Traced Before Anything Is Replaced
We identify the cause of an electrical problem before recommending a repair. Replacing parts without tracing the fault means the same problem comes back.
How long does a panel upgrade or service change typically take?
A straightforward 100-amp to 200-amp service upgrade is usually completed in a day, though it involves coordinating a utility disconnect and scheduling an inspection, which adds time to the overall timeline. More complex work, like replacing a fuse box and adding circuits at the same time, may take longer. We give you a realistic timeline on the call when the job is scoped.
What are the risks of aluminum or knob-and-tube wiring in an older home?
Knob-and-tube wiring lacks a ground conductor and was not designed for the loads a modern household places on a circuit. Aluminum branch wiring, common in homes built in the 1960s and 1970s, expands and contracts with heat in ways that can loosen connections at outlets and switches over time. Both types are worth evaluating, and remediation is typically staged by circuit so the work fits the scope and budget of the project.
When should I call an electrician rather than attempting a repair myself?
Swapping a burned-out bulb or resetting a tripped GFCI is straightforward. Anything involving the wiring behind an outlet or switch, work inside the panel, or a symptom like a warm outlet, a burning smell, or a buzzing sound is worth a call. Wiring problems that are diagnosed incorrectly tend to come back, and some of them are fire risks. We scope the job on the call so you know what is involved before anyone shows up.
Permits and Inspection Handled Where Required
Panel upgrades, service changes, and new circuit work require permits in most cases. We handle the permit and inspection process as part of the job so nothing is left open after the work is done.
How are emergency electrical calls handled?
We are available at any hour, any day, including nights, weekends, and holidays. When you call about a sparks, a burning smell, a hot panel, or a total loss of power, we take the information on the call, confirm the scope, and give you the price before the visit is scheduled. If the situation involves visible arcing or smoke, leave the area and call from outside.
What is involved in grounding and bonding in an older home?
Older homes often have two-wire circuits without a ground conductor, which means outlets cannot be grounded without running new wiring or installing GFCI protection as a code-approved alternative. Bonding ties metal components of the electrical system together so a fault has a clear path back to the panel rather than through a person. Both are addressed as part of safety inspections and rewiring work, and we explain what each finding means before anything is recommended.
Older and Newer Wiring Both Handled
Ocean County's housing stock runs from post-war knob-and-tube to new construction, and we work across all of it. The wiring type and age are factored into the scope from the first call.
What does it mean when outlets or switches stop working for no obvious reason?
A dead outlet is often a tripped GFCI somewhere upstream on the same circuit, a failed receptacle, or a wiring fault deeper in the circuit. A switch that stops working may have a loose connection at the terminal or a failed switch. In some cases a tripped breaker is the cause, but if the breaker looks fine and the outlet is still dead, there is something else going on. We trace the fault to the source rather than replacing parts and hoping.
What should I know about adding a circuit for a workshop or garage?
A workshop or garage with power tools, lighting, and a compressor puts a real load on a circuit. We start with a load calculation to figure out how many circuits the space needs and what size breakers are appropriate. If the garage is detached, a subfeed from the main panel to a small subpanel in the garage is usually the cleanest approach. Panel capacity at the main service is checked before any of that is sized.
How does pricing work for electrical jobs, and when is the price confirmed?
The price is confirmed on the call after the job is scoped. Panel work, rewiring, and EV charger installations each involve different materials, circuit counts, and access conditions, so the rate reflects what the job actually involves. You know the price before anything is scheduled. Factors that affect cost include the number of circuits, panel size, the condition of existing wiring, and how accessible the work area is.
Call (848) 395-9659 and we will scope the job, give you the price, and get it scheduled.
(848) 395-9659